Frigidaire FRT21IQRJZ1 User Manual page 13

Toe Grille Assembly
Instructions
• With the end of the Toe Grille against the side of the
Lower Hinge, align the two (2) Assembly Slots with the
two (2) Mounting Clips.
• Snap the Toe Grille onto the Mounting Clips. (See
Figures 1A and 1B)
• Carefully tilt the bottom edge of the Toe Grille away from
the refrigerator base.
• Pull the Toe Grille toward you until it "unsnaps" from the
Mounting Clips. (See Figure 2)
• Open the refrigerator door.
• Line up the Toe Grille Assembly over the two large holes
on the front of the refrigerator base (See Figure 1).
• Push the Toe Grille Assembly into the holes until the grille
snaps in place (See Figure 1).
• Grasp the Toe Grille on each side and pull directly
outward.
• The grille assembly will pop out of the holes for easy
cleaning.
13