Stb Configuration Options; Zones And Room Number Assignments - LG STB-3000 Setup Manual

EZ-Manager Wizard (Cont.)

STB Configuration Options

From the STB Configuration Options screen, you can choose how to proceed with the configuration
of this STB/display (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature(s) on the STB for location-specific
configuration purposes, select the "Zones & Room Number" option from this screen
and assign the appropriate TV Zone # and/or the Wi-Fi Zone # in the STB BEFORE
you continue with additional configuration.
STB CONFIGURATION OPTIONS
. To configure the STB for Pro:Centric operation, select NEXT.
. To set the optional Zoning features, select ZONES & ROOM NUMBER.
. To access the STB Manager / USB Download Menu, select USB CONFIGURATION.
This setup wizard will continue automatically in 60 seconds.
EXIT
Note: If there is no user action in this screen within one minute, the wizard will automatically
continue to the next configuration step.
Use the Left/Right arrow keys on the Installer Remote to navigate between options on this screen.
Each time you select/highlight one of the following options, the screen text and fields will change in
accordance with your selection.
• To continue with Pro:Centric configuration, select NEXT (default) and press OK on the Installer
Remote. Refer to "Configure Pro:Centric Settings" on pages 20 to 24 for additional information.
• To set the Zoning feature(s) on the STB, select ZONES & ROOM NUMBER. See "Zones and
Room Number Assignments" below for further information.
• Select USB CONFIGURATION to access the STB Manager / USB Download Menu. See "USB
Configuration" on pages 24 to 25 for further information.
Note: If you choose to exit the EZ-Manager Wizard from this point on, you will have the option to
save any settings made by selecting SAVE & EXIT in the exit confirmation pop-up window. Or, you
can exit the wizard without saving any settings by simply selecting OK in the confirmation pop-up
window.

Zones and Room Number Assignments

You may complete one or more of the fields in the Zones, Label, and Room Number screen or
leave them at their default settings (TV Zone and Wi-Fi Zone) or blank (Label and Room Number),
as desired. However, if you intend to use either of the Zoning features—TV Zoning and/or Wi-Fi
Zoning—on this STB, you MUST specify the appropriate values in the TV Zone and/or Wi-Fi Zone
fields as described on the following page. See also Reference section, "Using the STB's Zoning
Features," for further information.
18
USB CONFIGURATION ZONES & ROOM NUMBER
01
NEXT
206-4272