Installation Of Rom Socket - EverFocus eIVP-TGU-AI-D0000 User Manual

eIVP-CFS-AI-D0000 AI Box

3.4 Installation of ROM Socket

* Do not apply force to the actuator cover after IC inserted.
* Do not apply force to actuator cover when it is opening over 120 degree, otherwise, the actuator
cover may be broken.
* The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket.
* Make sure the white dot on the ROM is installed outwards of the socket.
Warning: If the installation does not follow as the picture, then it may cause severe damage to
chipset & MB.
18