Connecting Your Vcr Or Laser Disc Player - NEC VT615 User Manual

Connecting Your VCR or Laser Disc Player

Audio cable (not supplied)
VCR/ Laser disc player
Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc
player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to
connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc
player has this capability). Be careful to keep your right and left channel connections correct for stereo
sound.
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output
requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via
a scan converter.
VIDEO IN S-VIDEO IN
AUDIO IN
REMOTE PCCONTROL PC CARD
IN
S-VIDEO IN DVI-I IN
AUDIO IN VIDEO IN
L
R
/MONO
L R VIDEO S-VIDEO
AUDIO OUT VIDEO OUT
USB AUDIO IN AUDIO OUT
DVI-I COMPUTER
COMPUTER IN MONITOR OUT
Video cable (not supplied)
S-video cable (not supplied)
Audio equipment
Audio cable (not supplied)
24
2. Installation and Connections
AUDIO IN
L R