To Connect Scart Output (Rgb) - NEC VT615 User Manual

To connect SCART output (RGB)

Before connecting: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are re-
quired for this connection.
NOTE: Audio signal is not available for this connection.
Video equipment such as DVD player
Commercially available SCART cable
1. Turn off the power to the projector and your video equipment.
2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the
COMPUTER input of your projector and a SCART output (RGB) of your video equipment.
3. Turn on the power to the projector and your video equipment.
4. Use the COMPUTER button on the remote control to select the COMPUTER input.
5. Press the MENU button on the remote control to display the menu.
6. From the Advanced menu, select [Setup] → [Options] → [Signal Select] → [Computer] → [Scart].
SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred
to as Euro-connector.
NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more
information.
2. Installation and Connections
Projector
REMOTE PCCONTROL PC CARD
IN
S-VIDEO IN
AUDIO IN VIDEO IN
R L
/MONO
Female
ADP-SC1
20
COMPUTER IN
USB AUDIO IN AUDIO OUT
DVI-I COMPUTER
DVI-I IN
COMPUTER IN MONITOR OUT
To COMPUTER IN