Table of Contents
Advertisement
L550/L550D/L555/L555D
2. The CD/DVD/BD media will extend slightly over the sides of the disc
tray in order that you can hold it. Grasp it carefully by its edges and lift it
vertically off of the central spindle and out of the tray.
3. Press the center of the disc tray in order to close it - the tray will click
into place when it is locked.
How to remove a CD/DVD/BD when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer is
turned off although, in these circumstances, you can open the tray by
inserting a slender object such as a straightened paper clip about 15mm
into the eject hole just to the right of the drive's eject button.
You must ensure that you turn off the power before you use the eject hole.
If the CD/DVD/BD media is spinning when you open the disc tray, it may fly
off of the spindle and cause injury.
4-6
Figure 4-5 Removing a CD/DVD/BD
1. Eject hole
Figure 4-6 Manual release with the eject hole
1
User's Manual
Advertisement
Table of Contents
