Table of Contents
Advertisement
L550/L550D/L555/L555D
DVD Super Multi drive
For further information, please refer to Chapter 4,
Problem
You cannot access a
CD/DVD/BD in the
drive
Some CD/DVD/BDs
run correctly, but
others do not
9-10
Procedure
Make sure the drive's disc tray is securely closed -
press it gently into the computer until it clicks into
place.
Open the drive's disc tray and ensure the CD or
DVD is properly seated - it should lie flat with the
label facing upwards.
A foreign object in the drive's disc slot could
block laser light from reading the CD or DVD -
remove any foreign objects or obstructions that
may be present.
Check whether the CD or DVD is dirty - if it is,
wipe it with a clean cloth lightly dipped in water or
a neutral cleaner. Please refer to the
section in Chapter 4, for further details on
cleaning the media.
The computer's software or hardware
configuration may be causing a problem. Ensure
that these configurations match the requirements
of the CD/DVD/BD media (refer to the CD's or
DVD's documentation if available).
Check the type of CD or DVD media that you are
using - the drive supports the following:
DVD:
DVD-ROM, DVD-Video
CD:
CD-DA, CD-Text, Photo CD™
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
Operating
Basics.
Media care
User's Manual
Advertisement
Table of Contents
