Advertisement
Cleaning and Maintenance
Always pull out the mains power plug before starting any cleaning work.
1.
Cleaning
a.
Keep all safety devices, air vents and the motor housing free of
dirt and dust as far as possible.
b.
Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure.
c.
Always clean the tool after each use.
d.
Clean the equipment regularly with a moist cloth and some soft
soap. Do not use cleaning agents or solvents, which may attack
the plastic parts of the equipment. Ensure that no water can seep
into the device.
2.
Maintenance
There are no parts inside the equipment which require additional
maintenance.
3.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice
6
Advertisement
