Ripping Function - Philips BTM630V37 Manual

External Sources

Ripping function

This function enables you to record music to a
connected USB mass storage device or SD/
MMC memory card from any other source (i.e.,
DISC, AUX or BT) without interrupting your
enjoyment of the music.
1
Insert a USB mass device with sufficient free
space to the USB DIRECT
the set. .
●
Or insert an SD/MMC memory card with
sufficient free space to the SD • MMC slot on
the top of the system.
(See "Preparations: Connecting a USB device or
SD/MMC memory card")
2
Prepare the source to record from.
DISC - load the disc. (See "CD/MP3-CD/WMA
Operations".)
BT (BLUETOOTH) - Connect a Bluetooth-
enabled device supporting the A2DP profile to
the system. Select a track where ripping will start
(See "Bluetooth Operation").
AUX - connect external equipment.
3
Press REC • to start ripping.
➜
"NO MEDIA" will be displayed briefly if there
is no USB mass storage device or SD/MMC
memory card connected to the system.
➜
"REC" will start flashing on the display.
➜
In the DISC mode, "REC_1ONE" will scroll
once.
●
In the DISC mode, to record all tracks starting
from the one you selected, press REC • again.
➜
"REC ALL" will be displayed briefly.
●
In the TOC mode of a disc, press REC • again
to start speedy ripping.
4
At any moment, simply press 9 to stop ripping.
24
pg001-034_BTM630_37-Eng
Notes:
– Some functions may be unavailable during
ripping. In this case, you may see a prompt of
"PRESS STOP TO RELEASE" on the display panel.
– You can continue enjoying music during ripping.
However, music playback will be interrupted during
speedy ripping.
– This function can also be combined with the
programme function. In this case, selection of "REC
socket on
ALL" in DISC mode will record all programmed
tracks from the starting point to the USB mass
storage device or SD/MMC memory card.
– Never unplug the USB mass storage device or
SD/MMC memory card before pressing 9 to stop
ripping.
– In the DISC mode, when you stop ripping or the
free space is insufficient, the current track being
ripped will not be recorded to your USB mass
storage device or SD/MMC memory card and the
playback will stop at the same time.
To delete a track from your USB mass
storage device or SD/MMC memory card
1
Plug in the USB mass storage device or SD/
MMC memory card.
2
Select the track to be deleted during playback.
3
Press and hold 9 for 3 seconds.
➜
"PRESS OK TO DELETE" scrolls.
4
Press OK to confirm the deletion within 5
seconds.
➜
"DELETE" appears.
The making of unauthorized copies of
copy-protected material, including
computer programmes, files, broadcasts and
sound recordings, may be an infringement
of copyrights and constitute a criminal
offence. This equipment should not be used
for such purposes.
24 2007.6.14, 17:15