Sharp LC-32HI5012E Service Manual page 56

• One USB flash disk
6.2.3 Upgrade Introduce
Copy the upgrade file into the USB Flash Disk.
Insert the USB Flash Disk Into the USB PORT of 6486 board.
Turn On your 6486 board.
If the upgrade file is correct, the software will begin upgrade automatically.
6.2.4 Upgrade interface
Upgrade interface
• Durning upgrade process, screen will display upgrade progress information, and please do
not turn off your TV, it will reboot automatically while the upgrade is complete.
• 100% mean the upgrade is complete,then pull out USB storage and restart TV.
• Error mean upgrade fail. If upgrade fails, please turn off your TV and try to upgrade again.
Led flash mode
Durning upgrade process, we can know about the upgrade status from the LED flash mode.
During upgrade
RED 1000ms GREEN 1000ms
Upgrade succeed
RED 250ms GREEN 250ms
Upgrade fail
RED 1750ms GREEN 250ms
flashing, until upgrade succeed or fail.
flashing, Long time to blink until power off.
flashing, Long time to blink until power off.
56