Ir Sensor; Batteries; Cleaning - Philips 50PFT5500 User Manual

Table of Contents

Advertisement

1 - Press  , select All Settings and press OK.
2 - Select Android Settings and press OK.
3 - Select Preferences >  Speech and
press OK.
4 - Select the language you want to use and
press OK.
5 - Press  BACK to go back one step or
press  EXIT to close the menu.
6.3

IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
6.4

Batteries

If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, in Help, press the colour
key
Keywords and look up End of use.
6.5

Cleaning

Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 series55pft550050pft5500/5655pft5500/56

Table of Contents