THERM PRO TP359 Quick Start Manual

THERM PRO TP359 Quick Start Manual

Bluetooth thermometer/hygrometer

Advertisement

Bluetooth Thermometer/Hygrometer
Model No. TP359
According to the operating system of your smartphone,
scan the following QR code to download and install.
Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected
Thermometer/hygrometer. You will now be able to remotely monitor the temperature and
humidity of your living room, bedroom, greenhouse and etc. from your smartphone.

Features

 
1. Temperature range: -4˚F to 140˚F (-20˚C to 60˚C)
2. Temperature accuracy: +/-0.5˚F (+/-0.3˚C)
3. Humidity range: 10% to 99%
4. Humidity accuracy: +/- 2%
5. Power source: 2 X AAA batteries (3V)
6. 2.4GHZ wireless Bluetooth function, connect to mobile app via Bluetooth module
7. ˚F /˚C button: press it to toggle the temperature display unit between ˚F and ˚C
8.
button: press and hold it for 2 seconds to
enter pairing status
 
9.
button: press it to turn on/off backlight
10. CLEAR button: press and hold it for 2 seconds to clear the maximum and minimum
humidity/temperature readings recorded in last 24 hours

Usage

Follow the simple steps below to set up your ThermoPro Bluetooth
Thermometer/Hygrometer and remotely monitor the temperature and humidity of your
living room, bedroom, greenhouse and etc. from your smartphone!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP359 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for THERM PRO TP359

  • Page 1 Bluetooth Thermometer/Hygrometer Model No. TP359 According to the operating system of your smartphone, scan the following QR code to download and install. Introduction Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc.
  • Page 2 Step 1: Download and install the “ThermoPro Sensor“ App. Scan the QR code above, or search for “ThermoPro Sensor” on the Apple Store for IOS devices or on the Google Play Store for Android devices. Download the App and install it on your smartphone.
  • Page 3 This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.
  • Page 4 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents