THERM PRO TP-09 Manual

Professional remote cooking

Download this manual

Enlarged version

Remote Food Thermometer

Model No. TP-09

Introduction

Congratulations on your purchase of the Professional Remote Cooking Thermometer,

a programmable radio frequency food thermometer. You will now be able to remotely

monitor the time and temperature of food cooking on your grill, smoker or oven.

Components

1. 1 - receiver unit.

2. 1 - transmitter unit.

3. 1 - detachable stainless steel probe sensor.

4. 2 - 2* AAA batteries.

Receiver Features

Receiver LCD Screen

Light ON/OFF

CLEAR

START

MIN

STOP

MODE

LCD (Liquid Crystal Display) – Displays all icons, temperature and timer. See LCD

diagram for detailed information.

Belt Clip – Battery compartment clip allows you to be mobile. Clip the receiver unit

to belt.

Battery Compartment – Holds 2 AAA batteries.

Sound Speaker

/ºC/ºF

Battery Compartment

-1-

Belt Clip

Need help?

Do you have a question about the TP-09 and is the answer not in the manual?

Page 1 Remote Food Thermometer Model No. TP-09 Introduction Congratulations on your purchase of the Professional Remote Cooking Thermometer, a programmable radio frequency food thermometer. You will now be able to remotely monitor the time and temperature of food cooking on your grill, smoker or oven.
Page 2 Transmitter Features Buttons 1. MODE – Press to select thermometer or timer mode. Press and hold for 2 seconds to enter Synchronization/Pairing mode. 2. HR – In timer mode, press once to set hour. Press and hold for 2 seconds, the hours will increase by 10 hours per second.
Page 3 c. Then open the battery compartment of receiver and insert two “AAA” batteries. The Measure meat temperature set to your specific taste receiver will enter Synchronization mode which is indicated by flashing Reception 1. Press MODE to select thermometer mode. The upper display will show a small MEAT Signal icon on the display.
Page 4 HELPFUL HINTS Keep the stainless steel probe sensor and wire away from children. Not Intended for Use by Persons ages 12 and Under. If the receiver and/or the transmitter display LLL or HHH instead of the probe temperature, wait for probe to reach room temperature. If LLL or HHH is still displayed, it is likely the Clean the stainless steel probe and dry thoroughly after each and every use.