Table of Contents
Advertisement
18. SETTING THE TIME TABLE PROGRAM
This function allow special mark "★" printing, an External Time Signal (optional) and a
Built-in buzzer (optional). These functions can be programmed for each day of the week
and each time period.
※Up to 48 programs can be set (Program No.1 Through No.48).
※The "Ext. signal" and the "Built-in buzzer" are available only when "Optional PC board"
is connected to the time stamp.
Code for Day of the week
Day of the week
1 Monday only
2 Tuesday only
3 Wednesday only
4 Thursday only
5 Friday only
Example: Monday to Friday 09:01 ~ 18:00 Special mark "*" on.
Monday to Friday 09:00 Ext. signal on
Monday to Friday 18:00 Built-in buzzer on
1.
Press the [F] button and position the "▲"
over the "Time table program" mark.
At the same time, the flashing digit indicates
"Program No.".
2. Setting program No.1 (Special mark
(1) Setting the code for "Day of the week".
Press the [E] button, and then the Program No.
is entered. At the same time, the flashing changes
from the "Program No." to the "Code for Day of the
week".
Such as example, press the [+] or [-] button to set
at "8", and then press [E] button. At the same time
the flashing changes from "Code for Day of the week" to the "Code for Action".
Day of the week
6 Saturday only
7 Sunday only
8 Monday to Friday
9 Monday to Saturday
10 Every day
Code for Action
1 Special mark "★" on
2 Special mark "★" off
3 Ext. signal on
4 Built-in buzzer on
P rog ra m
N o .
C o d e fo r D a y
o f th e w e e k
"★"
on)
32
Action
C o de fo r
A ction
▼
T I M E TA B LE
P R O GR A M
●
●
●
●
F
E
▼
TIME TABLE
PROGRAM
●
●
●
●
F
E
Advertisement
Table of Contents
