Antenna Connection - Polaroid TK2450 Operating Manual

Table of Contents

Advertisement

CABLE TV (CATV) CONNECTION
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to
the set, screw the 75-ohm cable to the ANT. Terminal.
Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. For more specific
instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below. Please note: An RF switch provided
with two inputs (A and B) is required (not supplied).
RF switch (not supplied)
RF
TV REAR
"A" position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV's channel keys.
"B" position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler by
using the converter's channel keys.
Note: Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
ANTENNAS
The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
1. A 75-ohm system is generally a round cable with F-type connector that can easily
be attached to a terminal without tools (not supplied).
2. A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm
terminal through a 300-75-ohm adapter (not supplied).
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor
antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
Connect the outdoor antenna cable lead-in to the ANT. terminal
on the rear of the TV set.
TV REAR
RF

Antenna connection

IN
OUT
Cable TV converter/
descrambler
(not supplied)
Antenna cable
Two-set
signal
Cable TV Line
splitter
(not
supplied)
A. Combination VHF/UHF Antenna
VHF/UHF
antenna
300-ohm
twin-lead
(not supplied)
OUT
6
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
300/75-ohm
VHF/UHF
adapter
antenna
(not supplied)
or
75-ohm
coaxial cable
B. Separate VHF and/or
UHF Antennas
UHF
VHF
antenna
antenna
300-ohm
twin-lead
Combiner
300-ohm
twin-lead
IN
or
75-ohm
coaxial cable

Advertisement

Table of Contents
loading

Table of Contents