Advertisement
Wired remote controller installation/service mode
Additional functions of your wired remote controller
1. If you want to use the various additional functions for your wired remote controller, press the top right corner (hidden
button) of the display for more than 3 seconds and drop it. Then you can press [ + ]/[ - ] buttons and select No.3 and press
[ OK ] button.
- You will enter the additional function settings, and the main menu will be displayed.
- If you select the other number and press [ OK ] button, then you can go back to the normal display.
2. Refer to the list of additional functions for your wired remote controller on the next page, and select the desired menu.
- Using the [ + ]/[ - ] buttons, select a main menu number and press the [ Mode ] button to enter the sub-menu setting
screen.
- Using the [ + ]/[ - ] buttons, select a sub menu number and press the [ Mode ] button to enter data setting screen.
- Using the [ + ]/[ - ] buttons, select the settings.
- Press the [ Fan ] button to select page.
- Press the [ OK ] button to save the current settings. the [ OK ] button is invalid on the main menu or sub menu setting
screen.
- Press the [ Cancel ] button for more than 3 seconds to exit to normal mode without saving settings.
ENGLISH-15
Setting
Sub menu
value
Main menu
Move menu
Move page
Page
Advertisement
