Canon XH A1S Instruction Manual page 80

Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the
2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON] or
[ON(OSD)].
3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or
[SD LOCKED] to match the video output you wish to use.
4. Close the menu.
When [SDI OUTPUT] is set to [ON(OSD)],
be included in the video signal output from the SDI terminal.
When [SDI OUTPUT] is set to [ON(OSD)]:
The on-screen displays included in the video output signal are determined by the display level
selected with the DISP. button (
never included in the video signal output.
The [SIGNAL SETUP]
2 Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal
Use the HD/SD COMPONENT OUT terminal to monitor the video that the camcorder is recording and use
the VIEWFINDER COMPONENT OUT terminal to monitor the picture on the viewfinder screen.
SD
HD/SD HD/SD HD/SD
* The audio signal is separate from the component video signal
When using the HD/SD COMPONENT OUT terminal, select the appropriate component video signal
depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting option
and close the menu.
80
dial to .
[COMP.OUT] setting is not available.
Open the terminal cover
DTC-1000 Component Video Cable (supplied)
will appear on the screen and on-screen displays will
33). Markers (safety zone guide, level/grid markers, etc.) are
STV-290N Stereo
Video Cable* (supplied)
Signal flow
Signal flow
INPUT
Yellow
VIDEO
White
L
Red
R
Green
Blue
Red
AUDIO
Y
Pb
Pr