Canon XH A1S Instruction Manual page 33

Selecting the On-Screen Displays
You can select the amount of information shown on
the screen from full, partial or no display. Repeatedly
pressing the DISP. button will cycle through the
options in the following sequence.
1
Level 1 : All screen displays
Level 2: Customized displays (
3
Level 3 : Markers, safety zone guides, date/time
Level 4: No displays
1
This level cannot be selected if [SYSTEM SETUP/
2
If [DISPLAY SETUP/
set to [CUSTOM KEYS], the functions currently assigned to the custom keys will be displayed instead.
3
This level cannot be selected if [DISPLAY SETUP/
all set [OFF].
The camcorder's on-screen displays will also appear on a connected external TV or monitor.
Reviewing the Recording
In record pause mode, this function allows you to review
the last few seconds of your recording.
Press and release the
button.
The camcorder rewinds the tape, plays back the last few
seconds, and returns to record pause mode.
If the current video signal standard is different from the signal standard in which the tape was
recorded, the recording will not be played back correctly.
103), date/time
] [GUIDE INFO] is set to [D/T DISPLAY], the date and time will be displayed; if it is
(record review)
2
2
] [ALL DISPLAY] is set to [DISABLE].
] [MARKERS], [SAFETY ZONE] and [GUIDE INFO] are
33