LG A09AW1 Owner's Manual page 11

1,MFL67647015,영영 2019. 3. 8. 영영 1:56 Page 11
Inserting batteries
Insert batteries before using the remote
control. The battery type used is AAA (1.5 V).
1. Remove the battery cover.
2. Insert the new batteries and make sure that
the + and - terminals of the batteries are
installed correctly.
3. Reattach the battery cover.
NOTE
If the display screen of the remote control
starts to fade, replace the batteries.
Installing the remote control
holder
Install the holder where there is no direct
sunlight to protect the remote control.
1. Choose a safe and easily-accessible place.
2. Fix the holder by fastening the 2 screws
firmly with a screwdriver.
3. Slide the remote control into the holder.
Operating method
Point the remote control towards the signal
receiver at the bottom of the air conditioner to
operate it.
NOTE
• The remote control may operate other
electronic devices if pointed towards them.
Make sure to point the remote control
towards the signal receiver of the air
conditioner.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
EN
11