Advertisement
Quick Links
Assembly, Installation, Setup, and Operating Instruction
- Tool Free Dock Mount Models; Series 200 -
Holds Kayaks / Paddleboards up to 125 pounds.
•
•
For Docks with Wood, Composite Wood, Vinyl, and Aluminum Decking.
Must have Dock side boards less than 7 ½ inches. Truss Docks 10
•
inches.
•
Designed for standard dock decking thickness of up to 1 ½ inches.
•
The underside of your dock Must be accessible.
Model DS200 – Aluminum Dockside Operation
•
Operates from the Dockside Only.
•
Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
•
Accommodates Freeboard (Dock Surface to Water Level) height up to 36 inches.
Model WS200 – Aluminum Waterside Operation
•
Operates from the Waterside Only.
•
Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
•
Accommodates Freeboard (Dock Surface to Water Level) height up to 36 inches.
Please read these instructions carefully before using this product and save this
manual for future use.
For assistance, please call: 585 – 734 – 7374
Or send email to: info@DockCraft.com
"The DockSider"
OM200 - 012721
A Kayak / SUP Lift and Dock Storage Rack
DockCraft Industries LLC
3694 Nibawauka Beach
Canandaigua, New York 14424
Patented
Page 1 of 13
TM
Advertisement
Related Manuals for DockCraft DockSider DS200
Summary of Contents for DockCraft DockSider DS200
- Page 1 Please read these instructions carefully before using this product and save this manual for future use. For assistance, please call: 585 – 734 – 7374 Or send email to: info@DockCraft.com DockCraft Industries LLC 3694 Nibawauka Beach Canandaigua, New York 14424...
- Page 2 Store only one kayak per “The DockSider” 10. If the DockSider is not working properly, please contact DockCraft Industries immediately for assistance. 11. Do not enter or exit your Kayak or Paddleboard when your kayak is engaged within “The DockSider”...
- Page 3 How do you make a warranty claim? • Please contact DockCraft Industries for a Return Material Authorization (RMA) number before returning items. A shipping address will be provided at that time. What does your warranty not cover? •...
- Page 4 Assembly Instruction Attach Cradle Handle : 1 - Position Handle over Cradle. 2 - Slide the Handle over extension on Cradle. 3 - Depress Snap Button on Cradle. 4 - Seat Handle until Snap Button pops through the Handle hole. 5 - Repeat process for the other Cradle.
- Page 5 Insert Clevis Pins to set height of rack from water - continued Waterside Rack Hole 4 Hole 4 Hole 2 Hole 2 Circular Retaining Ring Clevis Pin Circular Head Retaining Ring Clevis Pin Head Thread Webbing through Cam Buckle : 8 –...
- Page 6 Dockside Operation Model – DS200 Waterside Operation Model – WS200 “The DockSider” Mounting Options DockCraft Industries Clamp On Mount for “The DockSider” - Kayak Dock Rack and Paddleboard Dock Lift - Kayak / Paddle Board Dock Rack Clamp On Mount...
- Page 7 If your dock has dimensions thar do not fall within the dimensions specified, give us a call (585-734-7374) or email us at info@dockcraft.com. In many cases, we can modify the mount to your needs. Set the Dock Clamp to the proper dimension.
- Page 8 Install the Clamp on Mounts on your Dock 1 - Select a position on your dock where you choose to mount your Kayak Storage Rack. Ensure there are not any electrical or structural components in the area. 2 - The Docksider should be mounted on 1 section of your dock. 3 - Make sure the wood on your dock is solid (not cracked or rotting) at the installation position.
- Page 9 For Truss Style Docks You may have to remove the Adjustment Rod as it may interfere with the lower horizontal rail. The Dock Clamp will secure the mount between the top and bottom rail or the top rail and one of the diagonals near the bottom rail. Follow the instructions above to install.
- Page 10 To “Lock” the Brackets and Pivot Laterals together insert “Locking Pin” on both sides of unit. If Clevis Pin with Circular Retaining Ring in Hole 2 or 4 of Pivot Lateral is seated in the Top Slot. Insert 2 Clevis Pin through hole in bracket and secure with “R”...
- Page 11 Note: This dimension should be “measured / gaged” when starting the lift. If your watercraft will not fit between the strap and the handle or is less than 3 inches; Lengthen the strap via the cam buckle. If greater than 5 inches, shorten the strap. Lift your kayak just out of the water.
- Page 12 Now that the webbing length is set, Secure Loose end of webbing length as follows: 1st Webbing Keeper 10 to 18 Position the 1st Webbing Keeper approximately inches from Cradle Handle 10 to 18 inches down from the cradle handle; on each web strap. 2nd Webbing Keeper Thread the loose end of webbing through Webbing Keeper (2 places Cam Buckle Loose End of Webbing...
- Page 13 You’re DONE - just Load / Latch / and walk away! WE SINCERELY HOPE YOU ENJOY THE CONVIENIENCE OF “The DockSider” For assistance, please call: 585 – 734 – 7374 Or send email to: info@DockCraft.com DockCraft Industries LLC 3694 Nibawauka Beach Canandaigua, New York 14424 www.DockCraft.com Page 13 of 13...
Need help?
Do you have a question about the DockSider DS200 and is the answer not in the manual?
Questions and answers