Audio Connection To Optional Equipment - LG DP171 Owner's Manual

Setting up the Player (continued)

Audio Connection to Optional Equipment

Connect the DVD player to your optional equipment for audio
output.
OPTICAL
DIGITAL IN PUT
or
Optical cable
(Not supplied)
You must set the A/V IN/OUT switch to the "A/V OUT" mode
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AUDIO OUT jacks on the DVD
player to the audio left and right IN jacks on your amplifier, receiv-
er, or stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
L
R
(Dolby Digital™, MPEG 2, or DTS): Connect one of the DVD
AUDIO INPUT
Player's DIGITAL AUDIO OUT jack to the corresponding in jack on
youramplifier. Use an optional digital audio cable.
Audio/ Video
cable (Supplied)
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality.
For this you need a multi-channel audio / video receiver that sup-
ports one or more of the audio formats supported by your DVD
player such as MPEG 2, Dolby Digital and DTS. Check the receiv-
er manual and the logos on the front of the receiver.
N O T E S
If the audio format of the digital output does not match the capabil-
•
(Black)
ities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround Sound via a digital connection can
only be obtained if your receiver is equipped with a Digital Multi-
channel decoder.
• To see the audio format of the current DVD in the on-screen dis-
play, press AUDIO.
36