V-TAC 8604 Instruction Manual page 3

PARTS INDICATOR
OPERATION GUIDE
1. Put the micro USB port into the power input of the desk lamp
2. Refer to the functions of each button in previous page (Outline) to use the lamp. Short
press is required to adjust the functions except that brightness increase and decrease need
long press.
3. When using the wireless charging function, place phones with Qi receiver onto the
wireless charging area. At this time, the wireless charging indicator turns on and flickers to
indicate that wireless charging is ON. The indicator turns off after the phone is removed.
Wireless charging area
Brightness Decrease
Light Mode / Light Power
Button
Brightness Increase
FIG 1
ENGLISH