Franke Designer Series Technical Manual

DESIGNER 10 FUNCTION OVEN 90CM

SPECIFICATIONS

Recommended use
Material
Functions
Colour availability
Dimensions
Weight
Source
Cavity size
Max current
Temperature range
Timer
Convection fan
Cooling fan
Display
Child lock
Door glazing
Bottom element
Shelf rack
Baking pan (enamelled)
Telescopic runner
Power cord without plug
Power cord length
Controller (knobs)
Dimensions are nominal measurements only.
CLEANING RECOMMENDATIO
Clean the surface of the unit with a damp cloth, soft brush or fine sponge and then wipe dry.
In case of heavy soiling, use hot water with non- abrasive cleaning product. For cleaning the glass of the oven door,do
not use abrasive cleaners or sharp metal scrapers, these can scratch the surface or lead to the glass being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel parts. Do not use a high pressure cleaner for
cleaning the unit. The baking pans may be washed in mild detergent.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor
reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only.
Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
Domestic
Black Glass
10
Black
894 x 478.5 x 521mm
60kg gross, 53kg net
Electrical
105L
230V-15A 240V-15A
50/250
Digital timer
Yes
Yes
LED
Yes
Triple
Concealed
2
1
1
Hard wired
1400mm
Touch control
NS
2
DESIGNER SERIES
*T&C's apply