Canon VIXIA HF M300 Instruction Manual page 185

Printer cover open
- Close the printer cover securely.
Printer error
- A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's
green power lamp and orange error lamp flash alternately.)
- Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the
power outlet and contact the appropriate customer support center or service center.
Printer in use
- The printer is in use. Check the printer status.
Printing error
- The printer does not support the paper size selected for [Paper Settings]. Set [Paper Settings]
to [Default] or a paper size supported by the printer used.
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. Check the printer status.
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator
flashes or an error message appears on the printer's operation panel, refer
to the printer's instruction manual.
• If you cannot solve the problem even after consulting this list and the
printer's instruction manual, contact the closest Canon Service Center
(refer to the list included with the printer).
Additional Information
185