Cinema Mode: Giving A Cinematic Look To Your Recordings - Canon VIXIA HF M300 Instruction Manual

recordings while on land, we recommend using the [s Surface]
recording program.
- To switch the recording program between [r Underwater] and
[s Surface] while the camcorder is in the waterproof case, turn on
the camcorder while holding
- p will appear on the screen when the camcorder's temperature
becomes too high. If this happens, turn off the camcorder, take it out
of the waterproof case and keep it in a cool place until the
temperature goes down. If the camcorder becomes too hot, it will turn
off automatically.
- When making recordings underwater with the [r Underwater]
recording program, the image on the LCD screen will appear redder
than the actual subject. This will not affect the recording.
- When a commercially available wide-converter or other accessory is
attached to the waterproof case, the camcorder may focus on the
accessory. In such case, move the zoom lever toward P to focus on
the subject.
- See Specifications (0 202) for additional notes about the
[r Underwater] and [s Surface] recording programs.
* Underwater is a unique environment that is ever-changing, depending on factors
such as the weather and water conditions. In addition, water absorbs red light,
which causes objects to appear bluer and greener.

Cinema Mode: Giving a Cinematic Look to your Recordings

Give your recordings a cinematic look by using
D
the [ Cine Mode] recording program. Combine
this recording program with the 24 fps progressive
frame rate [E PF24] to get the enhanced effect
of the 24p Cinema Mode.
Operating modes:
To set the [D Cine Mode] recording program
8
[FUNC.]
j
[Rec. Programs]
pressed down.
8
[D Cine Mode]
8
[a]
63
Video