Advertisement
OPER TING M NU L ND INSTRUCTIONS
CLE NING
To preserve the finish and life of your RedHots
®
Heat Lamp, Eagle recommends cleaning the exterior surfaces by wiping them
down with a damp cloth, making sure that the heat lamp has been turned off and has cooled down. Harder-to-remove stains may be
removed by using an aluminum non-abrasive cleaner. brasive cleaners can scratch and ruin the finish, making it possible for dirt
buildup to occur.
C UTION:
Be sure the unit is off and to wait until the lights have cooled down enough to handle before cleaning.
REPL CEMENT P RTS
Light Bulbs -
Eagle Group Part Numbers: 382022 (halogen - 43W 120V)
W RNING
To replace a light bulb, simply unscrew the bad bulb and replace with a new one. Use only bulbs provided by Eagle Group.
These bulbs are specifically coated with Teflon to comply with NSF standards and to prevent breakage or possible food contamination.
Under Shelf Mounting Bracket -
Eagle Group Part Number: 355148 (for one bracket — two brackets required)
Chain for Chain-Mounted Units -
Eagle Group Part Number: 358372 (ordered per foot)
For all other replacement parts, please contact Eagle Group's Service Department
to determine whether a field replacement is allowed.
S FETY PREC UTIONS
Only use mounting methods and materials described and suggested by Eagle Group to prevent personal injury or damage to the heat
lamp and its components.
Be sure that all specified clearances have been maintained for safe operation and to prevent combustion of work surfaces.
5
Advertisement
