Advertisement
Quick Links
instruction sheet
#361653
cArrier For AnY DAMAGe. SAVE YOUR BOX AND ALL PACKING MATERIALS.
You Are resPonsiBLe For DAMAGe to Your unit iF returneD iMProPerLY PAcKeD.
This manual provides installation and operation instructions for Eagle's RedHots
Lamps. Pleases read this manual before installing and operating this unit. Personal injury or
damage to the unit can occur if installed or operated incorrectly.
Eagle's RedHots
®
Heat Lamps help keep your foods at their optimum serving temperatures while maintaining a high level of quality.
These heat lamps focus their heat over the entire area and provide even heat distribution to eliminate hot spots.
Eagle's RedHots
®
Heat Lamps can be purchased in standard watt or high watt units, with or without lights. Heat lamp lengths range
from 18˝ long to 144˝ long and come in 120-, 208-, and 240-volt. See the catalog charts for specific lengths, wattages, and volt
constraints. Note: Display lamps only available for 120-volt operation.
ll heat lamps are shipped completely assembled with field wiring connections and are ready to be mounted. Eagle Group provides
a 7/8˝ and 1-1/8˝ knockout on the switch side of the unit.
Safety precautions in this manual are preceded by the words W RNING and C UTION, printed in boldface type, and should be read
with care. W RNING indicates there is a possibility of personal injury. C UTION indicates that damage to the unit can occur.
eagle Foodservice equipment, eagle Mhc, specFAB
RedHots
Heat Lamps
OPER TING M NU L ND INSTRUCTIONS
insPect contents iMMeDiAteLY AnD FiLe cLAiM With DeLiVerinG
(undershelf-mounted unit shown)
Retain this manual for future reference.
GENER L NOTES:
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice/SpecF B
• Fax: 302/653-2065
®
CAUTION
IMPORT NT!
, and retail Display are divisions of eagle Group. ©2017 by the eagle Group
®
®
Heat
EG10067
®
) 800/441-8440 • (MHC/Retail) 800/637-5100
Revised 12/17
Advertisement
Summary of Contents for Eagle Group RedHots RHHL Series
- Page 1 Note: Display lamps only available for 120-volt operation. ll heat lamps are shipped completely assembled with field wiring connections and are ready to be mounted. Eagle Group provides a 7/8˝ and 1-1/8˝ knockout on the switch side of the unit.
- Page 2 OPER TING M NU L ND INSTRUCTIONS END MODEL SPECIFIC TIONS: ll heat lamps are offered in 120-, 208-, and 240-volt. 120-volt operation for display lamps only. Please refer to the catalog for all model numbers. See the legend below for details on the model number. Model number description: prefix length...
- Page 3 NOTE: The control switch box should be located and/or labeled so that it is clear to the operator which control switch box operates its corresponding heat lamp. C UTION: If a heat lamp is to be installed over a steam table, please see below for Eagle Group’s recommended installation heights. W RNING Standard Wattage Heat Lamps There must be 10˝...
- Page 4 Secure the heat lamp brackets using #1/4-20 bolts/screws (hardware not provided by Eagle Group) to ensure a secure installation.
- Page 5 W RNING To replace a light bulb, simply unscrew the bad bulb and replace with a new one. Use only bulbs provided by Eagle Group. These bulbs are specifically coated with Teflon to comply with NSF standards and to prevent breakage or possible food contamination.
- Page 6 RedHots ® Heat Lamps WIRING DI GR MS...
- Page 7 RedHots ® Heat Lamps WIRING DI GR MS...
- Page 8 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice/SpecF B ® ) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 eagle Foodservice equipment, eagle Mhc, specFAB , and retail Display are divisions of eagle Group. ©2017 by the eagle Group ®...