Mitsubishi Electric Mr. Slim PEA Series Technical & Service Manual page 3

● Display
For purposes of this explanation,
all parts of the display are shown
as lit. During actual operation, only
the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is sup-
ported.
"Centrally Controlled" indicator
Indicates that operation of the re-
mote controller has been prohib-
ited by a master controller.
"Timer Is Off" indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Caution
● Only the Power on indicator lights when the unit is stopped and power supplied to the unit.
● If you press a button for a feature that is not installed in the indoor unit, the remote controller will display the "Not Available"
message.
If you are using the remote controller to operate multiple indoor units, this message will appear only if the feature is not
present at the parent unit.
● When power is turned ON for the first time, it is normal that "PLEASE WAIT" is displayed on the room temperature indication
(For max. 2minutes). Please wait until this "PLEASE WAIT" indication disappears then start the operation.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time (The 12 hour clock or The 24
hour clock), unless the simple or Auto Off timer is set.
If the simple or Auto Off timer is set, shows the time
remaining.
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
ERROR CODE
˚F˚C
˚F˚C
ONLY1Hr.
Up/Down Air Direction indica- Room Temperature display
tor
Shows the room temperature.
The indicator shows the direc-
Louver display
tion of the outcoming airflow.
Indicates the action of the swing
"One Hour Only" indicator
louver. Does not appear if the
Displayed if the airflow is set to louver is stationary.
Low and downward during COOL
or DRY mode. (Operation varies
according to model.)
Indicates that the power is on.
The indicator goes off after one
hour, at which time the airflow di-
rection also changes.
3
"Sensor" indication
Displayed when the remote controller
sensor is used.
"Locked" indicator
Indicates that remote controller but-
tons have been locked.
"Clean The Filter" indicator
Comes on when it is time to clean the
filter.
Hr ON
Timer indicators
AFTER OFF
FUNCTION The indicator comes on if the corre-
FILTER
sponding timer is set.
WEEKLY
SIMPLE
AUTO OFF
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
(Power On indicator)