Philips 24PFL5459/V7 User Manual page 15

4.10 Features Menu
1 Press
2 Select [Setup] > [Features]
then press OK
3 Select one of the following settings.
then press OK. .
Press to move, and press
Back Light
Picture
Energy Saving
EasyLink
Sound
ARC
Installation
MHL
MHL CHARGING
Features
LED Indicator
Parental
Software Update
Reset
Picture
Reset
Sound
Installation
Features
Parental
• [Back Light] :
The backlight value
can be varied . This function used to
adjust brightness level of panel.
[Energy Saving]:
• To save
the power consumed by TV, select
power saving modes Off/low/Mid/ High/
Audio only Mode.
After selection of Low/Mid/high energy
saving indication displayed on energy
meter by pressing info key of remote control
Low: After selection of energy saving
option to "Low", approx.5% of rated
power will get saved.
Mid: After selection of energy saving
option to "Mid", approx.10% of rated
power will get saved.
High: After selection of energy saving
option to "High", approx 25% of rated
power will get saved.
Audio only : After selection of energy
saving to "Audio only " panel power
switched off & only audio come
from TV sets which results in
power saved of approx 35%
Note
Press any key ( except Find, Text, subtitle
Vol +/- and Mute) to exit 'Audio only' mode
• [Easy Link]: If you connect HDMI-CEC
compliant devices through HDMI,you
to adjust.
can control them at the same time with can control them at the same time with
your TV remote control.
• [ARC] : This is used to control ARC feature,
If set ARC to "On" TV sound will be deactivated
& ARC enabled HT sound will be activated
• [MHL] : This is used to control MHL feature,
If set MHL to "On" mobile screen will be
Displayed on TV
• [MHL CHARGING] : If set MHL charging
To On mobile can be charged through TV
Even if TV is in standby mode.
• [LED Indicator] : This is used to control
LED indicator status when TV is in standbby
Mode.
If LED Indicator is "ON" LED will glow when
TV is in standby mode & vice versa.
[Software Update] :
This option is for updating the software.
[Reset]
: Reset to factory default settings.
4.11 Parental Menu
.
2
Picture
• Sound
3
Installation
•
Features
• •
Parental
1 Press
Select [Setup] > [Parental]
2
then press OK
Select one of the following settings.
3
then press OK.
•
[Child Lock]: Enter the password, then
the following menus will open.
Note: Default password is "0000"
Child Lock
EN 13