Dimplex AC3RE Instruction Manual page 20

Heat Output Selection
The remote control offers the facility to select the heat output from the appliance
between 'HI', 'LO' heat and 'FAN' settings. 'HI' heat is set by default. This is a global
heat setting and once set all other operational modes will operate with this setting.
In order to set/change the heat setting,
• From the home screen press and hold the ADV button for 2 seconds. The remote
will enter the heat selection screen.
• Use the arrow keys to navigate to the desired setting and confirm using the
ENTER key. The 'FAN' is on a separate screen that is accessed by continuously
pressing the arrow keys.
• The remote will return to the home screen and all heating modes will function
with the selected heat output.
NOTE:
The HI temperature setting will modulate the heat output to optimise the efficiency
of the product. As the room temperature approaches the set-point the heater will
automatically switch to the LO heat setting.
NOTE:
If FAN output is selected FAN will be visible on the home screen instead of time.
20