Adjusting The Timer Function - LG M4224C Owner's Manual

Adjusting the timer function

Time
Clock
On/Off Timer
Sleep Time
Auto Sleep
Power On Delay
Power Saving
Automatic Standby
Clock
If the current time is incorrect, reset the clock manually.
1) Press the MENU button and then use
2) Press the
3) Press the
4) Press the
On/Off Timer
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use
2) Press the
3) Press the
4) Press the
5) Press the
6) Press the
Sleep Time The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use
2) Press the
3) Press the
Auto Sleep If Auto Sleep is active and there is no input signal, the set switches to off mode
automatically after 10 minutes.
1) Press the MENU button and then use
2) Press the
When connecting multiple monitors and turning the power on, the monitors are
Power On
turned on individually to prevent overload.
Delay
Note
• In the event of power interruption (disconnection or power failure), the clock must be reset.
• Once the on or off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• When On time is operated, input screen is turned on as it was turned off.
User Menus
_ _ : _ _ AM
MENU
button and then use
button and then use
button and then use
button and then use button to select On/Off Timer.
button and then use button to set the hour(00~23).
button and then use button to set the minutes(00~59).
button and then use button to select On or Off.
button and then use button to select Select input or On Timer
button and then use button to set the hour(00~23).
button and then use button to set the minutes(00~59).
button and then use
26
button to select the Time menu.
button to select the Clock menu.
button to set the hour(00~23).
button to set the minutes(00~59).
button to select the Time menu.
button to select the Sleep Time menu.
button to select the Auto Sleep menu.
button to select On or Off.