Nemic-Lambda ZUP Series Manual page 23

3.8.4 External Control Connector -
The external control connector is configured for Local sensing and no external On/Off control. Refer to
Fig: 3-6 below for the default configuration description. The default configuration is: Local sensing,
Rear panel On/Off disabled (On/Off can be controlled by the Front panel or by the serial communication
port), and output voltage and current are controlled by the Front panel or by the serial communication
port. For other configurations, remove the contact that should be modified, and replace it with a new
one with a suitable connection. Replacement contacts are supplied in the packaging of the power
supply.
14
- S
+S
COM
P
VCVP
VCCP
RCCP
2
3.9 REPACKAGING FOR SHIPMENT
To ensure safe transportation of the instrument, it is recommended to use the original package. The
original packaging material is reusable. If the original package is not available, contact the Nemic-
Lambda Sales or service facility near you for details on obtaining suitable packaging and shipping
information. Please attach a tag to the power supply describing the problem and specifying the owner,
model number and serial number of the power supply.
13
- LS
+LS
On/Off
Output Good
VRFV
VRFI
Fig. 3-6:
RCVP
External Control connector - default configuration
1
(ZUP rear panel view)
Default configuration connections