Handheld digital tachometer
specialized software (27 pages)
Summary of Contents for Nidec-Shimpo FG-3000R
Page 1
PRESENTED BY JPBOWLIN.COM 817.332.8116 J.P. Bowlin is a quality-driven Calibration Company that has provided calibration, repair and sales of all types of weighing and measurement products since 1931.
Page 2
Overload Capacity: 150% of F.S. (LCD flashes beyond 110% of F.S.) Measurement Method: Peak, Track, Preset The new FG-3000R Series digital force gauges are the choice for Data Sampling Rate: 1000 Hz simple, cost-effective compression testing. Combining one of the...
Page 3
“ZERO” or “MODE” keys to shift to the next selection. Press “LOG” visual indicators. to cancel or touch “MENU” to confirm and exit. (Fig. 3-2) 1.3 Menu Structure The FG-3000R Series Force Gauge has multi-level menu interface (Table 1-3) that enables simple navigation and programming. MENUS SUBMENUS...
You can also select the mode under the Measurement menu in 4.1 Memory the Test Mode sub-menu. See Fig. 3-3(a) If the Preset is selected, a new screen will pop up where you can set the Upper and Lower limits. See Fig 3-3(b) Press ZERO to adjust the number and press MODE to move to the next digit.
Page 5
5.2 Auto Power All data points can be cleared from memory under the Delete all The FG-3000R has an automatic power off function. With Auto sub-menu (Fig. 4-4). A confirm window will appear asking you to Power on, if there is no operation performed within five minutes it confirm.
5.6 Calibration Because of the sensor material performance or the influence of external factors, there may be errors of a certain level after a period of usage. It is recommended to send the force gauge to a specialized test- ing organization for calibration. Fig.
Do not disassemble the gauge by your- RS-232 Specifications: self or attempt to repair. If you cannot resolve the fault yourself, -Hardware Flow Control: None please contact Nidec-Shimpo. -Data word length: 8 bits -Stop bit: 1bit -Parity: None...