Table of Contents
Advertisement
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connecting the stand base
1.
Place the monitor with its front facing downward on a cushion or soft cloth.
2.
Take out the cover and insert the power line.
3.
Tidy up the power line under the hooks.Then push the cover for setting.
4.
Insert the hooks into the matching holes in the base of the monitor.
5.
Insert the screw and fix it.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Hook
A3
Advertisement
Table of Contents
