Philips FW-P78 Manual page 19

All manuals and user guides at all-guides.com
– You can cancel manual programming by
pressing Ç (on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press 4 or 3 to select the desired
preset number.
™ The preset number, radio frequency,
and waveband appear on the display.
pg 01-31/P75-P78/34-Eng 19
Note:
Receiving RDS Radio Station
– When you press the RDS button and the
Ç
(for model FW-P78 only)
display shows " NO RDS ", it indicates
RDS (Radio Data System) is a broadcasting
that either the tuned station is not
service that allows FM stations to send
transmitting RDS signal or it is a non
additional information along with the
RDS station.
regular FM radio signal. This additional
information can contain:
RDS Clock
Some RDS station may be transmitting a
• STATION NAME: The radio station
real clock time at an interval of every
name is displayed.
minute.
• PROGRAM TYPE: The following
program types exist and can be received
Setting the time with RDS clock
by your tuner: News, Affairs, Info, Sport,
1 Press CLOCK/TIMER.
Educate, Drama, Culture, Science,
™ "--:--" or current time appears on
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
2 Press CLOCK/TIMER once more to
Other M, No type.
enter clock setting mode.
• RADIO TEXT (RT): text messages
™ "00:00" or current time starts
appear in the display.
3 Press RDS.
When you have tuned to a RDS station, the
™ The message "SEARCH RDS
RDS logo (Ç) and the radio station name
will appear on the display:
™ If the station does not transmit RDS
• The display normally shows the radio
station name if available.
™ When the RDS clock is read, "RDS
By repeatedly pressing RDS button you
can change the type of display
information:
™ The display shows in turn:
STATION NAME ™
™ If within 90 seconds, the RDS time is
PROGRAM TYPE ™ RADIO
TEXT ™ TUNED
FREQUENCY ™ STATION
NAME ...
Note:
– Some RDS station may be transmitting a
real time clock at a minute interval. The
accuracy of the transmitted time
depends on the transmitting RDS
station.
the display.
flashing.
TIME" will be displayed.
clock, "NO RDS TIME" will be
displayed.
TIME" will be displayed. The
current clock time is displayed for 2
seconds and will be stored
automatically.
not detected, "NO RDS TIME"
will be displayed.
2/22/00, 7:30 PM
TUNER
19
3139 116 19561