Returning To A Pre-Marked Position - Canon Optura 300 Instruction Manual

Returning to a Pre-marked Position

If you wish to return to a particular scene
E
later, mark the point with the zero set
memory and the tape will stop at that point
when you rewind/fast forward the tape.
CAMERA
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
• "0:00:00 Â" appears.
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, fast forward or
rewind the tape.
• "RTN 1" or "` RTN" appears.
• The tape stops automatically at "0:00:00".
• The tape counter changes to time code.
❍ Time code and tape counter display may not match accurately.
❍ The zero set memory may not function correctly when blank sections exist on
the tape.
❍ If you remove the tape, the zero set memory is canceled and the counter
display shows the time code.
86
PLAY (VCR)
ZERO SET
MEMORY
button
CARD CAMERA
REW ` button
PLAY e button
FF 1 button
STOP 3 button
CARD PLAY (VCR)
REC
PAUSE REW PLAY FF
ZERO SET
/ STOP /
MEMORY
×
2
AUDIO DUB. PAUSE SLOW
MENU SET
S