Front Wheel Installation; Charge City/Comfort - Charge City Owner's Manual

Charge Bicycle Owner's Manual
4. Remove the axle bolt.
Figure Removing axle bolt and cap.
4. Remove the wheel from the dropouts.
You may need to tap the top of the wheel
with the palm of your hand to release the
wheel from the front fork.
Figure Removing wheel front dropout.
137381 Rev 1 (02/20)
Charge City and Comfort

Front Wheel Installation

See video at chargebikes.com.
1. Secure the bike upright in a bike stand.
2. Install the wheel into the dropouts. Make sure
the brake disc locates between the brake
pads in the caliper.
Figure Lowering fork dropouts onto wheel.
3. Insert the axle bolt and cap through the
wheel hub from the brake disc side of the
fork.
Figure Inserting axle into wheel hub.
58
Technical Information
About Wheels