Table of Contents
Advertisement
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
[Back Camera Input]
[Off] [On]
[Camera Polarity]
[Battery]
[Ground]
[Parking Assist Guide]
[On] [Off]
Description
Setting rear view camera activation.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
You can set whether to display the parking assist
guidelines on the rear view camera images when backing
up your vehicle.
- 59 -
Advertisement
Table of Contents
