Error Messages - BBPOS Chipper OTA User Manual

4. Error Messages

Error Message
Device disconnect BT before update finish.
Device no response
Device cannot re-connect after 5 min scanning. Run the OTA again and check the firmware is
Bluetooth (error code - 3029).
Bluetooth (error code - 30XX).
BT connection timeout (01).
BT connection timeout (02).
Device fails to update - 1. not update to target
FW version
Bluetooth 2.0 Disconnected.
BBPOS Chipper OTA v1.5
CONFIDENTIAL
BBPOS Limited © 2021
Suggested Action
Place the device close to the mobile phone.
Reset the device and try again
Reset the device and try again
updated or not.
Place the device close to the mobile phone.
Reset the device and try again
Place the device close to the mobile phone.
Reset the device and try again
Place the device close to the mobile phone.
Reset the device and try again
Place the device close to the mobile phone.
Reset the device and try again
Use the latest Chipper OTA app and try again
Place the device close to the mobile phone.
Reset the device and try again
Page 16 of 18