Error Display Messages; Disc Player; Usb (Mp3/Wma) - Panasonic PP105160 Operating Instructions Manual

Error Display Messages

Disc Player

USB (MP3/WMA)

46
Display
Possible cause a
The disc is dirty, or is upside down.
a Check the disc.
The disc has scratches.
a Check the disc.
No operation by some cause.
a Unplug the power cord and plug it again. In
case the unit is still out of order, consult your
dealership.
The player for some reason cannot read the file
you are trying to play. (File recorded in an unsup-
ported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a Select a file that the player can read. Check
the type of data recorded on the disc. Create
a new disc if necessary.
A WMA file can be copyrighted.
a The file protected by copyright is not play-
able.
No disc in the player.
a Insert disc into the disc slot.
A USB device is not connected or the connected
device cannot be recognized.
aUse a USB memory that is suitable for this
unit.
No playable files exist.
An unsupported USB device is connected.
aUse a USB memory that is suitable for this
unit.
aRecord files that can be played back on this
unit onto the USB memory.
A USB device that exceeds the current capac-
ity that can be supplied is connected. For some
reason, an over-current was detected.
aUse a USB memory that has a consumption
current of less than 1 A.
aSwitch the Source, and select the USB (MP3/
WMA) mode again.
aSwitch the power off/on, and select the USB
(MP3/WMA) mode again.
aCheck that the USB connector section is not dirty,
and that there is no foreign objects.
Possible solution