Channel Selection; Channel Preset; Preset Channel Selection; Selection By Category - Panasonic PP105160 Operating Instructions Manual

Mp3 cd player/weather band receiver

Hide thumbs

Table Of Contents

Table of Contents

Repeat the steps 2 and 3 to enter a

4-digit number code.

When a 4-digit number code is correctly entered

and [BAND] is ﬁnally pressed, the all locked

channels are unlocked and start to be received.

(Once turns ACC ON/OFF, the channels return to

previous locked status)

Notes:

¡If a wrong number code is entered when selects a

locked channel, "WRONG CODE" is displayed and

returns to Channel 1.

¡If 10 seconds elapse before determining the entry

of the number code, "TIME OUT" is displayed and

returns to previous channel.

¡To exit the passcode entry, press [DISP] and

returns to previous channel.

¡To change the parental lock passcode, refer to

page 37 for setting.

Channel preset

Up to 6 channels can be preset in SXM1 to SXM3

respectively.

Use manual or seek tuning to tune into

a channel.

Press and hold one of the preset but-

tons [1] through [6] until the display

blinks once.

blinks once

Note: New channels overwrite existing saved channel

after this procedure.

Preset channel selection

Press the corresponding preset button [1]

through [6] to tune in a preset channel.

Selection by category

Category setting

You can toggle the category selection mode ON and

OFF every time you hold down [BAND] for more than

2 seconds. If the category is set to ON, the unit oper-

ates as follows for each button:

Notes:

¡When category is set to ON, the letter "c" is

displayed followed by channel number.

¡When category selection mode is active, as

indicated by "c", the preset buttons are disabled.

Turn off category selection mode to re-enable the

preset buttons.

Category selection

[FOLDER }]: Next category

[FOLDER {]: Preceding category