Figure 29: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever to lock the HDD/SSD module in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
overview" on page
RX2530 M5
13.
Operating Manual
Operation
"Documentation
85