Setup Guide & Parts Diagram; Rear Panel & Connections - Cortex HDTT-5000 Operation Manual

NOTE-POWER BUTTON IS LOCATED ON THE FRONT PANEL. PLEASE
PRESS AND HOLD THE POWER BUTTON FOR 2 SECONDS TO BOOT
YOUR UNIT.
1. AUDIO OUT L/R RCA connectors, (MASTER)
RCA type unbalanced stereo audio output. These connectors output
audio signal generated from Side 1 (MAIN or MASTER) of the HDTT-
5000 unit.
2. AUDIO OUT L/R RCA connectors, (SLAVE)
RCA type unbalanced stereo audio output. These connectors output
audio signal generated from the second HDT-5000 that is chain linked
or (SLAVED) to this HDT-5000
3. USB connector (type A)
Theses connectors are used to attach the USB mass storage devices
(MSD) that contains your music library. Suitable mass storage devices
include, but are not limited to: external hard drives, flash memory,
portable digital music players, CD/DVD-ROM drives, memory card
readers, and active USB hubs.
All manuals and user guides at all-guides.com
3
1 2
4. Power Cord Connector
5. Chain Link Ports
HDTT-5000 Operation Manual
Parts Diagram and Functions
Rear Panel
3
5 4
This connector is used to connect the power cord to your HDTT-5000.
Note that the power supply automaticaly switches as long as you have
a compatible power cable, you will be able to use your HDTT-5000 in
any region regardless of power (USA, UK, EURO, ETC)
These ports are used to connect HDTT-5000's together for device shar-
ing and using audio outputs from one unit for both sides. The first thing
you must do is select if the unit will be the Master or Slave unit by flip-
ping the switch to "M" or "S". From the master unit you have 2 audio
outputs, one for each side. Connect all audio leads to this HDTT-5000.
7