Download Print this page

Zanussi ZTB2000A-A Instruction Manual page 4

Advertisement

Cleaning before use
Wipe the inside of the Refrigerator with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp
sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before replacing in the
Refrigerator. The external parts of the Refrigerator can be cleaned with wax polish.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Refrigerator. Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE REFRIGERATOR.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before switching back on
to allow the coolant fluid to settle.
Before filling your refrigerator
Before storing foods in your refrigerator, turn the refrigerator on and wait for 24 hours, to make sure it is working properly
and to allow the refrigerator to reach the correct temperature.
INTRODUCTION
Before use
Please read these instructions and the Safety guidelines on page 1 carefully before using your new Refrigerator. The
Refrigerator is for indoor, domestic use only.
General Description of Refrigerator
Classified as Internal
ZTB2000A-A
No
1
2
3
4
5
6
7
8
9
10
11
ZTB2500A-A
No
1
2
3
4
5
6
7
8
9
10
Description
Freezer Shelf
Thermostat
Refrigerator Glass Shelf
Crisper Cover
Salad Crisper
Adjustable Foot
Little Bottle Rack
Egg tray
Upper Bottle Rack
Half Bottle Rack
Bottom Bottle Rack
Description
Freezer Shelf
Thermostat
Refrigerator Glass Shelf
Crisper Cover
Salad Crisper
Adjustable Foot
Little Bottle Rack
Upper Bottle Rack
Bottom Bottle Rack
Egg tray

Advertisement

loading

This manual is also suitable for:

Ztb2500a-a