LG WD-12320BDK Owner's Manual page 19

ow to use washer
H
Child lock
• If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and holding the
Option and Rinse button simultaneously.
(About three seconds)
•
When child lock is set, all buttons are
inoperable.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child lock works when
power is off.
18
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
1. Normal
• Cotton-Eco / Cotton / Synthetic performs 3
Rinses
• Wool/Silk / Hand Wash /Quick 30 / Delicate /
Duvet / performs 2 Rinses
2. Rinse + & Rinse ++
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse + or Rinse ++ function,
the Rinse Time and the Rinse water are
increased.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
The required lamp will light up for
identification.