Registration (Pairing) - Motorola VM36XL-2 User Manual

2.3

Registration (Pairing)

The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
M
button of the Parent Unit and the menu bar will pop up.
1. Press the
<
2. Press the LEFT button or
del/
the
+
3. Press the UP button or
O
button to confirm.
/
4. Camera
button to select the desired Camera and press the
searching for a camera unit, with "press PAIR on cam" shown.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and PAIR OK appears on the screen. The
video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will cancel its old registration.
Getting Started
>
RIGHT button until
add/ view/ scan
-
DOWN button to select
/ /
will pop up, press the
is highlighted, and
menu will pop up.
+
UP button or
O
add
, and press the
-
DOWN
button to start
13