Table of Contents
Advertisement
The information in this chapter provides easy guidelines for installing the SE encoder. The
following diagram shows the front panel:
ONLINE
FAULT
Status LCD
LEDs
Screen
Inventory and Installation
To prevent damage and/or safety hazards, always handle the SE encoder with care. Use the
SE encoder only according to instructions provided in this product manual. For part numbers
and other details, see "Connectors and Required Cables" on page 31.
Inventory
Verify that the shipping carton contains the following items:
•
•
•
•
•
•
•
•
•
Document Number: 504834-001
Single Channel Encoder
An SE-1010 or SE-2000 encoder with attached mounting brackets
SE-1010 / SE-2000 Encoder Product Manual (this manual)
SE-1010 / SE-2000 Encoder Release Notes
Detachable EIC power cord
Three (3) Phoenix connectors (2 audio, 1 Form_C)
One (1) DHEI cable
One (1) clip-on cord retainer
Four (4) phillips screws
Four (4) washers
VIDEO
AUDIO 1
ENTER
AUDIO 2
Service
Arrow
ENTER
LEDs
Buttons
Button
2
Installation
SE - 2000
3
Advertisement
Table of Contents
