Advertisement
(Power Button)
12
adjust the monitor settings.
allows selection of the input signal.
• If you connect the monitor to a computer using a D-SuB cable, select either the CLOuD or D-SuB input signal.
• The initial input signal is D-SuB.
Exits the OSD menu.
• D-SuB Input: Power On/Off
• CLOuD Input
Monitor Off: Press the power button once then the monitor will be turned off after 5 seconds.
CLOuD Off: Press the power button twice then the monitor and CLOuD connection will be disabled.
CLOuD On: Press the power button.
power Indicator
The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks white.
Advertisement
