Switching On The Machine; Authorised Work Techniques - Hammer N4400 User Manual

7.2 Switching on the machine

Warning: Risk of injury due to insufficient preparation!
It is only permitted to switch on the machine if, for the work at hand, the required preconditions are
fulfilled and any preliminary work is completed. For this reason the instructions for adjusting, fitting and
operating (see the corresponding chapters) must be read before switching on the machine.
Fig. 6: On- and Off switch

7.3 Authorised work techniques

If the switch lid is closed, then the machine is switched
off automatically.
20
!
The bandsaw has an On- and Off switch.
The switch has to be opened to be able to switch on the
device.
!
Lid
Operation