GE 28032 Series User Manual page 8

You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:
1. Press the cid/vol (▼ or ▲)
2. Press mute/menu button to enter the menu. SET RINGER TONE 01 shows in the display. 01 is default setting.
3. Use the cid/vol (▼ or ▲)
tone/melody you select.
4. Press the mute/menu button to save your selection. You will hear a confirmation tone and the selected ringer tone shows
in the display.
NOTE: You must have the Ringer Volume set to ON for ring tone to signal an incoming call.
Ringer Volume
From the Handset Setup Menu:
1. Press the cid/vol (▼ or ▲)
2. Press mute/menu button to enter the menu. SET RINGER 1HI 2LOW 3OFF shows in the display.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the
is the default setting.
4. Press the mute/menu button to save your selection. You will hear a confirmation tone.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
VIP Melody
This features allows you to assign a specific melody to someone you want to get your attention when the person calls.
When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with
VIP melody ring. You may choose from ten different polyphonic melodies and may store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the phonebook. (Refer to Storing CID Records
in phonebook). NO USER MEMORY will show in the display to remind the user to do CID record transfer
first.
Storing VIP Melody
From the Handset Setup Menu:
1. Press the cid/vol (▼ or ▲)
2. Press mute/menu button to select VIP melody feature and then display VIP 1 record.
- If VIP1 does NOT contain any specific number/records, it will display EMPTY.
3. Press cid/vol (▼ or ▲) button to select the specific VIP melody memory location (10 VIP locations) that does not contain
any record.
4. Press mute/menu button to display SELECT MEMORY.
NOTE: If the memory location does not contain any CID memory records and you are trying to mark a specific
record as VIP MELODY, then SELECT MEMORY will not be displayed. Instead, NO USER MEMORY will
display in prompt to alert the user.
5. Press the cid/vol (▼ or ▲)
6. Press mute/menu button to confirm and then display VIP MELODY 01 to wait for the melody tone selection.
7. Press the cid/vol (▼ or ▲)
melody selection)
8. Press mute/menu button to confirm.
NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records,
DUPLICATE NUMBER shows in the display.
Changing a Stored VIP Melody Record
Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with
new phone number.
When REPLACE VIP# ? shows in the display, you must press mute/menu button on the handset to confirm replacement.
Reviewing And Deleting Stored VIP Melody Record
From the Handset Setup Menu:
1. Press the mute/menu button to enter to VIP MELODY menu.
2. Use the cid/vol (▼ or ▲)
3. If you want to delete the information, press the delete/int/conf button on the handset while the entry displays. The display
show DELETE VIP# ?.
4. Press delete/int/conf again to confirm. You will hear a confirmation tone and VIP# DELETED shows in the display.
Key Tone
From the Handset Setup Menu:
1. Press the cid/vol (▼ or ▲)
2. Press mute/menu button to enter the menu. SET KEY TONE 1ON 2 OFF shows in the display.
3. Use the touch tone pad on the handset to select 1 or 2, or use the
is the default setting.
4. Press the mute/menu button to confirm.
button to scroll to the RINGER TONE sub-menu.
button to scroll to the desired setting (1 through 20). You will hear a sample of the ringer
button to scroll to the RINGER VOLUME sub-menu.
button to scroll to VIP MELODY sub-menu.
button to view the records from memory to be selected as VIP.
button to select from melody 01 to melody 10 (a testing tone is generated while making
button to scroll to the desired VIP Melody Record.
button to scroll to the KEY TONE sub-menu.
cid/vol (▼ or ▲) button to scroll to your selection. HI
cid/vol (▼ or ▲) button to scroll to your selection. 1ON